You are here:

Our LimeAGG aggregates are available in a variety of colours, making sure your customers have plenty of choice when selecting the look they like for their property. We take pride in the quality of our aggregates, which is why they are all made in the UK, giving us more control over the products we supply to you. All our products go through strict quality control before they are ready to be shipped. This means you can rely on your resin products every time you buy from Limegate Solutions, keeping your customers happy and building up your business’s reputation.

LimeAGG is designed for use with our LimeBOUND resin, creating a fully porous, SuDS-compliant system when applied with a compatible base and sub base. This means no standing water to worry about for your customers, and many years of enjoying their brand new, beautiful surfacing.

Want to ask us a question about our LimeAGG aggregate? Please get in touch. Call 01959 546 208, email  or fill in our form.


Contact us to ask any questions to help in specifying the right system:

Features and

These are the features and benefits you can expect from the LimeAGG system:

  • Part of the first and only QUV stable resin system in the UK
  • 7.5kg QUV stable resin pack
  • BBA audited manufacturer quality control system
  • Tested to slip resistance BS 8204-6
  • 15mm paths and drive on/drive off driveways
  • 18mm turning driveways/car parks to 7.5 tonne
  • SuDS compliant – highly permeable paving 850 litres/m²/minute
  • QUV stable resin will not discolour or degrade, unlike UVR and non-UV resins
  • Foot traffic after 14-15 hours at 20°C
  • Natural and recycled aggregates
  • Environmental benefits
  • Flexible and strong
  • All aggregates selected to reduce the chances of rust appearing
  • Low maintenance
  • In excess of 500m² can be installed per day
  • Members of FeRFA—The Resin Bound Association
  • Manufactured to ISO 9001/ISO14001 and OHSAS 18001
  • Made in the UK
  • No additional cacogenic catalyst handling required on site

Dos and Don’ts with


Do …

  • Use resin that meets industry standards
  • Use UV aliphatic resin
  • Use kiln dried aggregates
  • Buy a system from one supplier
  • Use a quality trowel aid
  • Buy from a FeRFA member
  • Check resin meets BS 8204-6 slip test regulations
  • Check iron rating for aggregates
  • Use a two-part UV resin
  • Read the health and safety datasheets
  • Time your mixes
  • Use approved contractors
  • Install a minimum of 15mm
  • Check granule PSV value
  • Install at 5oC and rising
  • Use a minimum 7% ratio of resin to aggregate
  • Use the correct paddle and drill MR2
  • Use a force action mixer

Don’t …

  • Simply buy the cheapest – do your research
  • Use non-UV resins
  • Use wet aggregate
  • Buy different parts from different suppliers
  • Use white spirit
  • Buy from an unaccredited supplier
  • Gamble on slip resistance
  • Use a three part (catalyst separate)
  • Ignore health and safety
  • Guess your mixing times
  • Buy based on price only
  • Take the sale over quality
  • Install at 12mm or less
  • Install glass unless it’s in a non-pedestrian area
  • Lay in cold and wet environments
  • Assume smaller packs meet standards
  • Under mix resins
  • Use a tumble mixer
  • Lay on blocks